Amazon.com.mx:Opiniones de clientes: Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair) Black

Mejor opinión positiva

Normal

Revisado en México el 2 de julio de 2020

Buen producto, solo hay que tener cuidado con las z906 ya que el tornillo es mas grande y si te pasas al atornillarlo puede que dañes la bocina.

A 13 personas les resultó útil

Mejor opinión crítica

Todas las opiniones críticas›

Jose rubio

No le quedan a las Sony

Revisado en México el 22 de septiembre de 2021

No le quedan a las roscas pequeñas

Ordenar por

Filtrar por

Filtrado por

CríticoBorrar filtro

231 calificaciones globales | 72 reseñas globales

Ha surgido un problema al filtrar las opiniones justo en este momento. Vuelva a intentarlo en otro momento.

Traducir todas las opiniones al Español

De México

Jose rubio

No le quedan a las Sony

Revisado en México el 22 de septiembre de 2021

Cantidad del paquete: 1Compra verificada

No le quedan a las roscas pequeñas

Me gusta

De otros países

Did the job but...

Revisado en Canadá el 14 de febrero de 2019

Cantidad del paquete: 1Compra verificada

Used these to mount my surround speakers and they did a good job because I needed ones that utilized the keyhole in the speakers and these were the only ones I could find but that aside they actually are made of a good thick ABS plastic and attach to the wall using 4 x 2 inch screws so as long as you use the right plugs for the walls you have they shouldn't be coming out randomly.

The rest of the bracket's construction I'm a little less sure about. It says 22lb in the description but I think they meant 22lbs for both of the brackets together because the surrounds I use are Klipsch R-14M's which are small bookshelf speakers that each weigh 7.13 lbs and the bracket's plastic ball joint can't hold its weight at any angle, it needs to rest the corner against the wall where I put a little foam to reduce vibrations. I really doubt they actually could hold 22lbs because even with 7.13lbs on each they have about a quarter inch of play in just the bracket flexing. Its the old problem of combining plastic and metal parts together, metal on both sides and plastic in the middle means that the most force is being put on the plastic parts which is fine as long as its a good mold and material but if you have kids or animals that are likely to bump into these, find something metal to use because I could see them breaking with a good bump. The only other down side is they're ugly and not white so they don't blend in at all, they also have "MONOPRICE" written across the front of them but for the money they'll get the job done but just barely.

A 21 personas les resultó útil

Traducir opinión al idioma Español

Lance

NOT Low Profile and NOT for 22lb Speakers

Revisado en Canadá el 10 de octubre de 2021

Cantidad del paquete: 1Compra verificada

This is not a low profile mount. The speaker sits 4-5" off the wall, so it's ugly looking at it from the side. Also my speakers are about 15lbs and the speaker mount can't hold them up. The mount doesn't rio out of the wall (drywall mount is strong enough) but the ball joint used to adjust the angle of the speaker just sags all the way down so the speakers are angled down at 45 degrees. I ended up drilling a hole and putting a screw into the ball joint so it wouldn't sag.

A 2 personas les resultó útil

Traducir opinión al idioma Español

Michael Barrett

Not universal

Revisado en Canadá el 12 de enero de 2022

Cantidad del paquete: 1Compra verificada

The parts and hardware are of reasonable quality. I had to modify the speaker connectors for my Polk wall mount mains. Make sure you have the correct mounts on the rear of your speakers. The keyhole adaptors ripped right out of the mounting holes. I needed to drill holes and use wood screws to attach the plate. I read in another review that the mounts are no good for 22 lbs of support. I concur, my wall mount Polks are only half that weight and it is almost impossible for the positioning ball to hold the weight while trying to keep the speakers at the correct angle. One speaker almost fell onto my $5000.00 turntable. I caught it in time. I was able to modify them for my purposes but, I am a skilled woodworker and luthier. This is my opinion and experience with the product. Thank you, Michael

A 2 personas les resultó útil

Traducir opinión al idioma Español

Shaun S.

Didn't work for keyhole design

Revisado en Canadá el 16 de enero de 2022

Cantidad del paquete: 1Compra verificada

I bought this on the review BigD wrote as he was using the mount on his klipsch surround speaker which is similar to my klipsch. Seems the keyhole insert screw does not have a wide enough flat head to sit inside the keyhole and apply good pressure. And is very short for the nut to grab enough threads to clamp down tight. And just when you think you have the nut and keyhole tight...it comes loose with very little pressure and losens off the nut which eventually comes apart. Not sure if I got a bad batch but that keyhole insert screw isn't meant for my speaker. See pics.

Traducir opinión al idioma Español

Eric

22 lb capacity? Gnishhh...

Revisado en Canadá el 7 de septiembre de 2018

Cantidad del paquete: 1Compra verificada

They were easy ton install and the wall mounts seem quite sturdy, but the ball joints can barely hold my 10 lb speakers, so I can't imagine going above that... They will hold to the wall, I'm sure, but in my opinion it would be very difficult to set any desired angle for speakers above 10 lb.

A 3 personas les resultó útil

Traducir opinión al idioma Español

Amazon Customer

Over designed. the speaker sticks out an additional 4 inches from wall

Revisado en Canadá el 5 de enero de 2022

Cantidad del paquete: 1Compra verificada

its solid but ball/screw is 1.5 inches too long and cant be reduced. once assembled it is over 4 inches from wall and looks silly.
wasted my money. will find another solution

Traducir opinión al idioma Español

Andrei Barany

Not strong enough

Revisado en Canadá el 13 de junio de 2020

Cantidad del paquete: 1Compra verificada

Unfortunately had to return them, these cannot hold a 10lb speaker not alone a 22lb one.

Quality-wise it wasn't bad, but they are meant for way smaller speakers

Traducir opinión al idioma Español

Harvey G.

Poor instructions

Revisado en Canadá el 3 de noviembre de 2020

Cantidad del paquete: 1Compra verificada

The instructions are almost useless. I have Polk T15 speakers which has a keyhole mount. The bolts provided did not fit but I managed to source some that did. The mounts barely support my speakers.

Traducir opinión al idioma Español

Blair Cabot

Does not hold advertised weight

Revisado en Canadá el 16 de junio de 2020

Cantidad del paquete: 1Compra verificada

These mounts do not hold their advertised weight. I have 4.5kg speakers and this sags a lot. Will be returning.

Good for small speakers but nothing over 5lb, a far cry from the advertised 22lb.

Traducir opinión al idioma Español

¿Alguna pregunta? Obtén respuestas rápidas de personas que han opinado.

¿Necesitas el servicio de asistencia al cliente? Haga clic aquí

‹ Mostrar todos los detalles para Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair)...

5 estrellas		84%
4 estrellas		9%
3 estrellas		5%
2 estrellas		2%
1 estrella		1%

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair)...

›

Opiniones de clientes

Opiniones de clientes

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair) Black

Mejor opinión positiva

Mejor opinión crítica

Filtrado por

Ha surgido un problema al filtrar las opiniones justo en este momento. Vuelva a intentarlo en otro momento.

De México

Ha surgido un problema al cargar los comentarios justo en este momento. Vuelva a intentarlo en otro momento.

De otros países

¿Alguna pregunta? Obtén respuestas rápidas de personas que han opinado.

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair)... › Opiniones de clientes

Opiniones de clientes

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair) Black

Mejor opinión positiva

Mejor opinión crítica

Filtrado por

Ha surgido un problema al filtrar las opiniones justo en este momento. Vuelva a intentarlo en otro momento.

De México

Ha surgido un problema al cargar los comentarios justo en este momento. Vuelva a intentarlo en otro momento.

De otros países

¿Alguna pregunta? Obtén respuestas rápidas de personas que han opinado.

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair)...

›

Opiniones de clientes