Amazon.com.mx:Opiniones de clientes: Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair) Black

Mejor opinión positiva

Normal

Revisado en México el 2 de julio de 2020

Buen producto, solo hay que tener cuidado con las z906 ya que el tornillo es mas grande y si te pasas al atornillarlo puede que dañes la bocina.

A 13 personas les resultó útil

Mejor opinión crítica

Todas las opiniones críticas›

Jose rubio

No le quedan a las Sony

Revisado en México el 22 de septiembre de 2021

No le quedan a las roscas pequeñas

Ordenar por

Filtrar por

Filtrado por

2 estrellasBorrar filtro

51 calificaciones globales | 16 reseñas globales

Ha surgido un problema al filtrar las opiniones justo en este momento. Vuelva a intentarlo en otro momento.

Traducir todas las opiniones al Español

De México

De otros países

Lance

NOT Low Profile and NOT for 22lb Speakers

Revisado en Canadá el 10 de octubre de 2021

Cantidad del paquete: 1Compra verificada

This is not a low profile mount. The speaker sits 4-5" off the wall, so it's ugly looking at it from the side. Also my speakers are about 15lbs and the speaker mount can't hold them up. The mount doesn't rio out of the wall (drywall mount is strong enough) but the ball joint used to adjust the angle of the speaker just sags all the way down so the speakers are angled down at 45 degrees. I ended up drilling a hole and putting a screw into the ball joint so it wouldn't sag.

A 2 personas les resultó útil

Traducir opinión al idioma Español

Michael Barrett

Not universal

Revisado en Canadá el 12 de enero de 2022

Cantidad del paquete: 1Compra verificada

The parts and hardware are of reasonable quality. I had to modify the speaker connectors for my Polk wall mount mains. Make sure you have the correct mounts on the rear of your speakers. The keyhole adaptors ripped right out of the mounting holes. I needed to drill holes and use wood screws to attach the plate. I read in another review that the mounts are no good for 22 lbs of support. I concur, my wall mount Polks are only half that weight and it is almost impossible for the positioning ball to hold the weight while trying to keep the speakers at the correct angle. One speaker almost fell onto my $5000.00 turntable. I caught it in time. I was able to modify them for my purposes but, I am a skilled woodworker and luthier. This is my opinion and experience with the product. Thank you, Michael

A 2 personas les resultó útil

Traducir opinión al idioma Español

Blair Cabot

Does not hold advertised weight

Revisado en Canadá el 16 de junio de 2020

Cantidad del paquete: 1Compra verificada

These mounts do not hold their advertised weight. I have 4.5kg speakers and this sags a lot. Will be returning.

Good for small speakers but nothing over 5lb, a far cry from the advertised 22lb.

Traducir opinión al idioma Español

danwolde

Not for my center speakers

Revisado en Canadá el 9 de diciembre de 2019

Cantidad del paquete: 1Compra verificada

It didn't work for my center speaker. The speaker kept leaning forward

Traducir opinión al idioma Español

S. F. Miller

Non-standard Thread for Speaker Mount - Adapter Required

Reseñado en los Estados Unidos el 1 de marzo de 2022

Cantidad del paquete: 1Compra verificada

This bracket grasps an adjustable ball with a threaded bolt sticking out of it. The bolt threads do not fit standard speaker threads. This is a universal bracket with adapter plates. An included adapter pack looks like decent steel and machine quality, but these are more parts and connections than are needed for mounting small speakers.

Engineer note: The stated load capacity is dubious. Too many doobies! not enough calculations. The torque that 22 pounds (10 kilos) would put on the plastic ball clamp would break it. That was probably supposed to be a load capacity *bin* of 0 to 10 kilos.

Traducir opinión al idioma Español

Brent Seymour

Does not support heavy weight

Reseñado en los Estados Unidos el 14 de marzo de 2022

Cantidad del paquete: 1Compra verificada

I purchased these for Klipsche speakers that weigh approximately 8 pounds and have mounting spots near the base of the speaker on the back. The speakers immediately sag and no matter how tight you adjust the mount, it will not keep them in place [at the angle I want]. The mounting bolts are also super long and they don’t work well with my speakers that have a smaller entry port. All in all, I’m not satisfied with the purchase, but they may work for someone else’s smaller speaker needs

Traducir opinión al idioma Español

T. Mahoney

Rating is misleading - these are for SMALL speakers, capacity is nowhere near 22lbs

Reseñado en los Estados Unidos el 6 de febrero de 2020

Cantidad del paquete: 1Compra verificada

Functional usefulness of this bracket - where you can reposition and expect the ball socket mechanism to securely keep a speaker where you want it - is for speakers weighing well under 5lbs. You wont get a speaker anywhere near 10 lbs (let alone 22 lbs) to "work" with this bracket, unless you're simply dangling it by the bolt and letting gravity position it.

Tiny speakers? Sure, it's great.

22lbs is incorrect and dangerous to advertise if someone were to actually trust the frail plastic mounting options.

A una persona le resultó útil

Traducir opinión al idioma Español

Tracy T.

Requires a hole to be drilled in each speaker and secured with a single machine screw

Reseñado en los Estados Unidos el 14 de junio de 2019

Cantidad del paquete: 1Compra verificada

Most of this mount looked like it would be pretty solid for lighter speakers, but I was not willing to drill a hole in the back of a pair of Pioneer SP-BS22s (9 lbs) and secure it with what is essentially the wrong type of screw (a machine bolt) and only one bolt at that.
I was about to go ahead with the mount, but then I pictured the bolt stripping out a hole in the back of my speaker, so I just decided to send these back and get a different type of mount from WALI
If these came with a sturdier method of attaching the hardware to the back of the speaker they might be okay, but a single machine bolt is the wrong tool for the job. At least two thick woods screws would be a big improvement.

A 2 personas les resultó útil

Traducir opinión al idioma Español

Beth (Kenney) Lamie

Made my speakers vibrate

Reseñado en los Estados Unidos el 28 de septiembre de 2019

Cantidad del paquete: 1Compra verificada

I used these mounts with my Audioengine desktop speakers, thinking that screwing them to the shelf would make them less likely to be bumped and knocked over. However, having the speakers elevated on the mounting screw emphasized the speakers natural tendency to vibrate and created a buzzing sound when playing music. They sound better now that I've removed the mount and placed them on the shelves.

A una persona le resultó útil

Traducir opinión al idioma Español

Michael M.

Not all hardware is compatible.

Reseñado en los Estados Unidos el 6 de enero de 2022

Cantidad del paquete: 1Compra verificada

These do not fit the Samsung 9100s rear speakers. I was happy to see they had the keyhole adapter and then disappointed to find out it was almost a 1/2 inch too short. With the adapter in speaker slot, it would not even fit through the corresponding bracket, let alone try and get the nut on. Therefore, I was not able to use them. Not to mention the title of "flush mount," is not really accurate. No matter which fitment adapters used, everything stuck out at least 2 inches.

Traducir opinión al idioma Español

¿Alguna pregunta? Obtén respuestas rápidas de personas que han opinado.

¿Necesitas el servicio de asistencia al cliente? Haga clic aquí

‹ Mostrar todos los detalles para Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair)...

5 estrellas		84%
4 estrellas		9%
3 estrellas		5%
2 estrellas		2%
1 estrella		1%

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair)... › Opiniones de clientes

Opiniones de clientes

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair) Black

Mejor opinión positiva

Mejor opinión crítica

Filtrado por

Ha surgido un problema al filtrar las opiniones justo en este momento. Vuelva a intentarlo en otro momento.

De México

De otros países

¿Alguna pregunta? Obtén respuestas rápidas de personas que han opinado.

Mono Low Profile 22 LB. Capacity Speaker Wall Mount Brackets (Pair)...

›

Opiniones de clientes