Las opiniones de los clientes, incluidas las calificaciones por estrellas de los productos, son útiles para que otros usuarios obtengan más información acerca del producto y decidan si es el adecuado para ellos.
Para calcular la calificación global por estrellas y el desglose porcentual por estrellas, no utilizamos un promedio simple. En cambio, nuestro sistema considera aspectos como la fecha de la reseña y si el autor compró el artículo en Amazon. También se analizaron las reseñas para verificar la fiabilidad.
Tools are great, screwdrivers feel solid and pry tools do the job. I did have one issue using the joystick modules in an XBox One controller. It made the controller extra sensitive. I measured the resistance vs the Joystick angle and found that the maximum resistance was reached before the joystick hit the outer edge of the hard stop. Basically half of the expected movement of the joystick gave you the same as full movement by the original. This gives extreme sensitivity which I found to be too much compared with the original component that gave 100% reading just as the joystic hit the outer edge of the hole in the controller. (Max travel). If you like a very small joystick movement to have maximum effect on your movement in a game, then this is for you. For me, it was unusable compared to what I was accustomed. In the left hand joystick position (movement), it is bearable, but not the right hand one (aiming) that I use in First person games.
I purchased this with the intent of replacing both thumb sticks for an xbox one s controller. I have a fair amount of technical background so it took more research into figuring out how to open the sides of the controller than soldering in the replacement sticks. Overall, they work well but I gave them a 4 out of 5 because the sensitive of the sticks is a little different and unstable than the original sticks. One is slightly skewed and when playing a FPS game I can see a slight drift in it but for any other type of game it works just fine. Even some 3rd person shooters they work great.
Great for the buttons and the replacement stick covers, but replacing the joysticks is an extremely difficult job. I was only semi-successful, as in I got it changed without much damage, but it still isn't right. The stick still drifts.
I have experience in rework on printed circuit boards and even have a very nice digital soldering kit. What I don't have is a good board preheater, which combined with not being able to completely remove the PCB, made the job a headache that caused three of the lands on the board to delaminate. One was structural, and I was able to salvage the other two by soldering I thin piece of wire into the via that the land connected to.
I will likely not attempt this repair again, at least not without additional specialized tools.
I only bought this to dissassmble my controller and its pretty good for that cant say much for the joystick i also dont like the cheap feel of the plastic but it does its job well specifically the screw drivers and the green hook thing.
There was a small error when packaging the item, but I contacted the seller and they responded almost immediately. They did not hesitate to send me another kit with the correct items. I definitely recommend this product to anyone attempting to fix their controllers.